Glammer Flex 0,5G

0,5 G
  • delivery

    Free delivery in Poland from 100PLN/24EUR/22GBP

  • payment

    Secured payment

  • Delivery

    Delivery up to 4 working days

Choose the shimmery Glammer Flex in an elegant pearly-gold hue and create a glamorous pearly mirror surface! It’s enough to rub it into a warm top coat – a perfect nail design is within your reach!

  • Colour: gold.
  • Shade: pearly mirror surface.
Product attributes
Application tips
Application gel polish styles, gel styles, acrylic Styles
Application for product without dispersion
Consistency very fine flakes
  • Glammer Flex creates a pearly mirror surface. 
  • It has a beautiful gold-pearly hue.
  • It allows for creating quick and spectacular designs
  • Create any type of gel polish, gel, acrylic, or acrylgel nail design.
  • Apply a product without a dispersion layer* and cure it following the curing instructions for the selected lamp.
  • Use circular motions to rub in a minimal amount of the nail powder into a cured product.
  • Remove the excess with the soft Cupcake Brush thoroughly.
  • Secure the design with a top coat – Wet Look or Tip Top, remembering to secure the free edge.
  • Cure the top coat in the MultiLed lamp for 30 seconds.
  • Once you remove the hand from the lamp, wait for about 1 minute.
  • If you choose Wet Look, wipe the nails with a wipe soaked in Shea Super Shine Effect Cleaner.
  • To finish off, you can additionally apply your favourite nail care products.


*choose a product that suits your design:

  1. gel polish design – Tip Top;
  2. designs with an overlay created with such base coats as Protein Base, Mineral Base, or Whitemin Base – Dry Top, Tip Top, or coloured Arte Brillante gels;
  3. gel or acrylgel designs – Dry Top, Shine On, Tip Top, or Arte Brillante.


Why is the mirror effect hard to attain? Why isn’t the surface evenly covered?


  • The curing time has been too long.
  • Too much time had passed from the moment the hand was taken out of the lamp and the moment the nail effect was rubbed into the nail surface.
  • Too thin layer of the base product (especially around the cuticles and free edge).
  • Too little nail powder has been used.
  • The powder has been rubbed in for too long.


Why is there no mirror effect on the design? 

  • The product has been cured for too long.
  • Too thick product layer.
  • Too much nail powder has been applied.
  • The excess particles hadn’t been property cleaned before applying the top coat.