- Disinfect your and your customer’s hands. Check the condition of the skin, nails and make sure there are no contraindications for performing the procedure.
- Using a stick or a cuticle pusher delicately push the cuticles away and then work on them using selected bits.
- Use a 100/180 gradation buffer to mattify the plate and then remove dust with a soft brush.
- Carefully cleanse each nail using a dust-free cotton swab soaked in purple Cleaner.
- Cover the nails with primer. In most cases it will be Acid Free Primer. Performing manicure on a more demanding plate, reach for Acid Primer.
- Apply a thin layer of a selected base coat and cure for 30 seconds.
- Apply Aquamariola gel polish and cure in the MultiLed lamp for 30 seconds.
- Secure the design with a top coat, e.g. Tip Top or Wet Look and cure for 30-60 seconds.
- Wait for approx. 60 seconds until the top coat cools down.
- If you chose a top coat with a sticky layer*, remove it with a swab soaked in Shea Super Shine Effect Cleaner.
- To add more shine to the nails, polish them using a dry swab at the end.
*You don’t have to wipe a top coat without a sticky layer with Shea Super Shine Effect Cleaner. After waiting 1 minute, you can apply the selected Shea Elixir with keratin to nail folds.