Shimmers are phenomenal hybrid polishes with flecks, which in daylight give the effect of a beautiful glitter color, while in flash light the color becomes reflective and sparkles with a million flecks. Emeraldo is a green shade that delights with a silver-green flash. It will work perfectly in combination with other glitters like Disco Pola, Dj Blue, Lans Bounce.
CURING TIME
|
Type and power of the lamp |
Curing time of 1 layer |
|---|---|
|
MULTILED Lamp 36 W |
30s |
| Collections | Migotki |
|---|---|
| Application | gel polish styles |
| Soluble in remover? | yes |
| Consistency | creamy with particles |
| Coverage | Complete after 2 coats |
| Dispersion layer | current |
- creamy texture
- In daylight it gives the effect of a beautiful glitter color, while in flash light the color becomes reflective and shimmers with millions of flecks
- ideal for use on the entire nail and as an accessory, will also work well for embellishments and brush shading
- We start by disinfecting our own and the client's hands
- Put on gloves and check for any contraindications to the manicure
- Work out the shape of the free edge with a file of 100/180 gradation
- We work out the cuticles - we adjust the method individually. We can push them back with a hoof pick, stick and work out with selected cutters
- Matte the plate with a 100/180 gradation buffer, and remove the dust produced with a soft brush.
- Using a cotton swab soaked in Classic Cleaner, wipe each nail and thoroughly degrease the plate
- Apply primer - Acid Free Primer or Acid Primer.
- Apply a thin layer of the chosen hybrid base and cure for 30 seconds in a lamp
- We paint our nails with Emeraldo Gel Polish hybrid polish. For full coverage we need two layers of color. We harden each of them for 30 seconds in a MultiLed lamp.
- Cover the nails with the chosen hybrid top and harden again for 30-60 seconds in the lamp
- After removing your hand from the lamp, wait about a minute
- If you have chosen a top with a sticky layer*, wipe each nail with a cotton swab soaked in Shea Super Shine Effect Cleaner
- With a dry cotton ball we can additionally polish the nails to add a spectacular shine
The *top without a sticky layer does not need to be wiped with Shea Super Shine Effect Cleaner. It is enough - one minute after removing the hands from the lamp - to apply a drop of the selected Shea Elixir with keratin to the nail shafts.
Pro Tip:
To reduce the number of layers used, and at the same time increase the saturation, we suggest applying a base color similar to the color of the chosen flash flicker.
Shimmers are phenomenal hybrid polishes with flecks, which in daylight give the effect of a beautiful glitter color, while in flash light the color becomes reflective and sparkles with a million flecks. Emeraldo is a green shade that delights with a silver-green flash. It will work perfectly in combination with other glitters like Disco Pola, Dj Blue, Lans Bounce.
CURING TIME
|
Type and power of the lamp |
Curing time of 1 layer |
|---|---|
|
MULTILED Lamp 36 W |
30s |
| Collections | Migotki |
|---|---|
| Application | gel polish styles |
| Soluble in remover? | yes |
| Consistency | creamy with particles |
| Coverage | Complete after 2 coats |
| Dispersion layer | current |
- creamy texture
- In daylight it gives the effect of a beautiful glitter color, while in flash light the color becomes reflective and shimmers with millions of flecks
- ideal for use on the entire nail and as an accessory, will also work well for embellishments and brush shading
- We start by disinfecting our own and the client's hands
- Put on gloves and check for any contraindications to the manicure
- Work out the shape of the free edge with a file of 100/180 gradation
- We work out the cuticles - we adjust the method individually. We can push them back with a hoof pick, stick and work out with selected cutters
- Matte the plate with a 100/180 gradation buffer, and remove the dust produced with a soft brush.
- Using a cotton swab soaked in Classic Cleaner, wipe each nail and thoroughly degrease the plate
- Apply primer - Acid Free Primer or Acid Primer.
- Apply a thin layer of the chosen hybrid base and cure for 30 seconds in a lamp
- We paint our nails with Emeraldo Gel Polish hybrid polish. For full coverage we need two layers of color. We harden each of them for 30 seconds in a MultiLed lamp.
- Cover the nails with the chosen hybrid top and harden again for 30-60 seconds in the lamp
- After removing your hand from the lamp, wait about a minute
- If you have chosen a top with a sticky layer*, wipe each nail with a cotton swab soaked in Shea Super Shine Effect Cleaner
- With a dry cotton ball we can additionally polish the nails to add a spectacular shine
The *top without a sticky layer does not need to be wiped with Shea Super Shine Effect Cleaner. It is enough - one minute after removing the hands from the lamp - to apply a drop of the selected Shea Elixir with keratin to the nail shafts.
Pro Tip:
To reduce the number of layers used, and at the same time increase the saturation, we suggest applying a base color similar to the color of the chosen flash flicker.