Do your clients love animal prints? Conjure them up in a quick, easy and fun way thanks to Indigo stamping accessories. Panther, zebra, or maybe snakeskin? Choose from 10 designs and transfer them onto their nails in a few moments.
PROPERTIES
Dimensions: 60x120mm
Purpose: creating stamp decorations
Application onto: any type of nail plate
CARE TIPS
- Clean the template gently with a cotton pad soaked in Nail Polish Remover.
- If you use gels for stamping, reach for Wipe Off Cleaner.
- If the gel hardens on the surface of the template, you can cover the affected area with cotton pads soaked in a Remover for a few minutes, then clean the plate again with Wipe Off Cleaner. You can also soak the plate in warm water and use a wooden stick to gently remove the hardened gel from the nooks and crannies. Attention! Scratching the surface too hard with a stick or other tool can cause scratches that can be visible on the transferred patterns and destroy the decoration effect.
| Application for | any type of nail plate |
|---|---|
| Purpose | making stamped patterns |
- Laser engraved metal sheet
- 10 animal motifs including: leopard stripes, tiger stripes and snakeskin
- Prepare the nail surface for stamping:
GEL POLISH MANICURE
Cover the surface with a matte top coat or buff it with a 280 grit buffer and clean it thoroughly with a cotton pad soaked in Cleaner 1.
GEL MANICURE
After filing, cover the surface with a matte top coat or buff it with a 280 grit buffer and clean thoroughly with a cotton pad soaked in Cleaner 1.
CLASSIC MANICURE
Wait until the colour layer is completely dry.
- Choose a pattern from the template plate and cover it generously with the stamping varnish. You don’t have to cover the whole design with polish - it’s enough to cover half.
- Reach for a scraper and with a quick, decisive movement, scrape off the excess varnish from the plate. Pay attention to which side of the scraper you are working with. Always use the slanted side to drag the product across.
- Remember, speed matters in the stamping process! You can't wait for the varnish to dry on the plate.
- Press the stamper to the polish covered plate immediately and transfer the design onto the nail plate at a 45-degree angle - not perpendicularly. The pressure of the stamp on the plate should be gentle, in a semi-circular motion. Do not press the stamp with force, because the pattern will not transfer!
- When the pattern dries, protect it with a selected top and cure it in the lamp (gel polish and gel manicure) or cover it with a top coat (classic manicure).
ATTENTION! Never wipe the stamper or scrapper with Cleaner 1! It can permanently damage the surface of the tools and have an adverse effect on stamping quality. Sticky tape, a nail extension stencil or a lint roller will work best to clean off the stamper. As a last resort, you can gently clean the surface with the Wipe Off cleaner.
Indigo Stamping Plate 01
-
Secured payment
-
Delivery up to 4 working days
Do your clients love animal prints? Conjure them up in a quick, easy and fun way thanks to Indigo stamping accessories. Panther, zebra, or maybe snakeskin? Choose from 10 designs and transfer them onto their nails in a few moments.
PROPERTIES
Dimensions: 60x120mm
Purpose: creating stamp decorations
Application onto: any type of nail plate
CARE TIPS
- Clean the template gently with a cotton pad soaked in Nail Polish Remover.
- If you use gels for stamping, reach for Wipe Off Cleaner.
- If the gel hardens on the surface of the template, you can cover the affected area with cotton pads soaked in a Remover for a few minutes, then clean the plate again with Wipe Off Cleaner. You can also soak the plate in warm water and use a wooden stick to gently remove the hardened gel from the nooks and crannies. Attention! Scratching the surface too hard with a stick or other tool can cause scratches that can be visible on the transferred patterns and destroy the decoration effect.
| Application for | any type of nail plate |
|---|---|
| Purpose | making stamped patterns |
- Laser engraved metal sheet
- 10 animal motifs including: leopard stripes, tiger stripes and snakeskin
- Prepare the nail surface for stamping:
GEL POLISH MANICURE
Cover the surface with a matte top coat or buff it with a 280 grit buffer and clean it thoroughly with a cotton pad soaked in Cleaner 1.
GEL MANICURE
After filing, cover the surface with a matte top coat or buff it with a 280 grit buffer and clean thoroughly with a cotton pad soaked in Cleaner 1.
CLASSIC MANICURE
Wait until the colour layer is completely dry.
- Choose a pattern from the template plate and cover it generously with the stamping varnish. You don’t have to cover the whole design with polish - it’s enough to cover half.
- Reach for a scraper and with a quick, decisive movement, scrape off the excess varnish from the plate. Pay attention to which side of the scraper you are working with. Always use the slanted side to drag the product across.
- Remember, speed matters in the stamping process! You can't wait for the varnish to dry on the plate.
- Press the stamper to the polish covered plate immediately and transfer the design onto the nail plate at a 45-degree angle - not perpendicularly. The pressure of the stamp on the plate should be gentle, in a semi-circular motion. Do not press the stamp with force, because the pattern will not transfer!
- When the pattern dries, protect it with a selected top and cure it in the lamp (gel polish and gel manicure) or cover it with a top coat (classic manicure).
ATTENTION! Never wipe the stamper or scrapper with Cleaner 1! It can permanently damage the surface of the tools and have an adverse effect on stamping quality. Sticky tape, a nail extension stencil or a lint roller will work best to clean off the stamper. As a last resort, you can gently clean the surface with the Wipe Off cleaner.