• thick acrylic gel allows for smoother work and precise application regardless of the ambient temperature
• reduced polymerisation temperature for comfortable styling even with more damaged or sensitive plates
• does not run off the plate, does not flood the cuticles and is soft under the brush
• ideal for beginner nail stylists due to its ability to model the shape of the nail for a long time
• thick consistency allows for perfect shaping of the upper nail arch
• perfect for extensions, touch-ups, natural plate hardening and plate superstructure
• also suitable for construction french as well as for fantasy french
• very good covering properties
• can be used as a stand-alone styling product-with an additional layer of topcoat
• ideally suited as an undercoat for light colours and for pastels and neon to enhance their colour
• sawing kept to a minimum 
• express styling

Stencil-based extensions:

• Wash and disinfect hands, then put on gloves
• Disinfect client's hands, assess condition of both client's hands and nails
• Clean the tile, push back the cuticles with a hoof or wooden stick
• Shorten nails as much as possible and round with a 180-grade file
• Grind the tile with a buffer or 100/180 grit file
• Clean the plate of dust with a soft brush 
• Degrease the nail with a cotton swab soaked in Cleaner No 1
• Apply a suitable primer (Acid Free Primer or Acid Primer). Apply a thin layer of the chosen base to the natural plate and cure for 30 seconds in a Multiled lamp
• Fit and underlay template
• Spread a small amount of Take Your Time or Primo Ultimo gel on the plate and stencil and create a skeleton in the desired free edge shape.  Create in the Multiled lamp 30-60 seconds. The skeleton is not obligatory, you can also apply the acrylic gel on the stencil 
• Remove the stencil carefully
• Apply a portion of your chosen acrylic gel to the plate and spread it with the brush onto the free edge as well. Be sure to build up correctly and take care to create the correct top arch, apex and hairline. From time to time, moisten the brush in Wipe Off cleanser so that it doesn't stick to the paste. Cure in a multiled, depending on thickness and colour chosen: 30-90 seconds
• Repeat if necessary, taking into account the correct structure of the nail extension and cure in the multiled lamp
• Remove the inhibitory (sticky) layer with a cotton swab soaked in Wipe Off Cleaner
• Use a 180/240 or 100/180 grit file to sculpt the shape and curves of the nail
• You can cover your nails with just a top coat - your choice of hybrid or gel top, but you can also apply your chosen hybrid polish colour to the matted surface
• Once the 2 coats of colour have been applied and cured, top with your favourite top coat and cure in the lamp for 30-60 seconds
• If the product requires it, remove the inhibition layer with a cotton swab soaked in Shea Super Shine Cleaner
• Finally, you can polish your nails with a dry dust-free swab to make them look even more beautiful. You will then hear the characteristic creaking sound

Hardening of the natural plate:

• Wash and disinfect hands, then put on gloves
• Disinfect client's hands, assess condition of both client's hands and nails
• Clean the tile, push back the cuticles with a hoof or wooden stick
• Work out the shape of the free edge with a 180-grit file 
• Grind the tile with a buffer or 100/180 grit file
• Clean the plate of dust with a soft brush
• Degrease the nail with a cotton swab soaked in Cleaner No 1
• Apply a suitable primer (Acid Free Primer or Acid Primer)
• Apply a thin layer of Protein Base to the natural plate and cure for 30 seconds in a Multiled lamp
• Apply a portion of your chosen acrylic gel to the plate and spread with a brush. Be sure to build up correctly and take care to create the correct top arch, apex and hairline. From time to time, moisten the brush in the Wipe Off cleanser so that it doesn't stick to the paste. Keep an eye on the brush to make sure it is not too wet. Cure in a multilight, depending on thickness and colour chosen: 30-90 seconds.
• Remove the inhibitory (sticky) layer with a cotton swab soaked in Wipe Off Cleaner
• Use a 180/240 or 100/180 grit file to sculpt the shape and curves of the nail
• You can cover your nails with just a top coat-your choice of hybrid or gel top, but you can also apply your chosen hybrid polish colour to the matted surface.
• Once the 2 coats of colour have been applied and cured, top with your favourite top coat and cure in the lamp for 30-60 seconds
• If the product requires it, remove the inhibition layer with a cotton swab soaked in Shea Super Shine Cleaner
• Finally, you can polish your nails with a dry dust-free swab to make your nails look even more beautiful. You will then hear the characteristic creaking sound