Protein Base Gold Edition

The star of gel polish design finally in the setting it deserves! Here is bestseller Protein Base Indigo in unchanged formula with a new, golden bottle, thanks to which your favorite product will look phenomenal! Now Protein Base will be not only inseparable companion in your work, but also will become a unique decoration in your salon.

Curing time

• Extension Yes
• Soluble in remover? yes
• Dispersion layer current
• Consistency dense
• Coverage Transparent
• Nail structure Yes
• Regrowth of nails Yes

• A multi-purpose product - it works as a base for gel polish, gel and classic designs;
• Makes grown nails stronger and prevents them from splitting *;
• contains proteins derived from jojoba;
• it can extend nails up to 5mm;
• enables to build up a perfect C curve - even with a concave nail plate;
• creates a layer resistant to mechanical damage * and harmful external factors;
• stays on nails for up to 4 weeks *.

* Based on the tests of the accredited research laboratory of J.S. Hamilton, conducted on a group of 30 people.

1. Wash and disinfect yours and your customers' hands. Put on gloves. Assess the condition of the customer's hands and nails to make sure that there are no contraindications for the treatment.
2. Push the cuticles back using a cuticle pusher or a stick and treat them with e-file bit, e.g. 9, 1.
3. Thoroughly matt the nail plate with a 100/180 grit buffer.
4. Remove the excess nail dust with a soft brush.
5. Dehydrate the nail plate with a dust-free cotton swab and purple Cleaner.
6. Apply the appropriate primer (Acid Free Primer or Acid Primer).
7. Apply a thin layer of Protein Base and cure in the lamp (30 seconds LED).
8. Apply a second, thicker layer of the base to gently build up the nail so that it is not flat and cure again. You can turn the hand so that the product levels and creates a perfect surface (due to the thicker layer, the curing time can be extended to 60 seconds).
9. If the surface requires filing, use a dust-free cotton swab and Cleaner Wipe Off to remove the dispersion layer thoroughly.
10. Use a 100/180 grit file or a 100/180 grit buffer to smoothen the surface of the base and the free edge.EAN 5902188511505
11. Remove the excess nail dust with a soft brush and clean the surface with Purple Cleaner or Wipe Off.
12. Apply colour gel polish. Adjust the number of layers to the selected colour, and cure each in the MultiLed lamp for 30-60 seconds.
13. Apply the selected top coat and cure it in the LED lamp (30-60 sec).
14. After curing, wait at least 60 sec. If the top coat has a dispersion, remove it with Super Shine Cleaner or Shea Super Shine.