Gelastic Glass Pink is a transparent acrylic gel with a slightly pink shade that allows you to extend the nails in a simple and quick way. Gelastic Glass Pink is the perfect base for any nail set.
Curing Time:
Lamp |
Gelastic Glass Milky |
---|---|
MULTILED Lamp | 30-60s |
UV Lamp | 2-3min |
- Extension Yes
- Consistency Dense
- Coverage Transparent
- Nail structure Yes
- Regrowth of nails Yes
- Transparent - perfect base, but also a complete nail set,
- Thick, plastic,
- Elastic,
- Easy to file,
- Reduced polymerization temperature compared to traditional gels - does not generate heat in the lamp,
- No irritating smell,
- Efficient - up to 20 nail sets with 60g of the product *,
- Speeds up work - can be applied to several nails at once, practically no filing required,
- Minimal amount of nail dust during filing,
- Universal - it cures only in the lamp, you can work with it slowly,
- Two options for nail enhancement - Dual form and rigid, transparent forms.
*the number of nail sets created depends on the length of the built nails
- Indigo Transparent Forms
- Wash and disinfect yours and your customer's hands;
- Put on gloves;
- Assess the condition of the customer's hands and nails to make sure that there are no contraindications for the treatment;
- Push back the cuticles using a cuticle pusher or wooden stick;
- Treat the cuticles with e-file bits, e.g. no. 9, 1;
- Use a 180 grit file to shorten the nails as much as possible and file them round;
- Use a 180 grit file to roughen the plate surface thoroughly;
- Use a soft brush to remove any excess dust from the nail plate;
- Dehydrate the nail plate with a dust-free cotton swab soaked in purple Indigo Cleaner;
- Use an acid-free primer (we usually use an acid-free primer, only if we eliminate all other causes of air pockets, we can reach for an acid primer);
- Apply a properly matched form;
- Thinly apply the PrimoUltimo on the nail plate, then add a bead of the product on the form, shaping the nail frame and cure in the Multiled lamp for 60 seconds;
- Carefully detach the form from the frame and remove it completely pulling it down;
- Squeeze the gelastic out of the tube and use the spatula to place it on the nail; then, with a brush moistened in Control Liquid, first spread it gently at the cuticles, and then stretch it all over, remembering to shape it according to the correct structure of the extended nail;
- Cure in a MultiLed lamp for 60 seconds;
- Remove the dispersion layer with a dust-free cotton swab soaked in the Wipe Off Cleaner;
- Use the 180 grit file to shape the nails;
- Remove excess nail dust using a soft brush;
- Wipe the surface again with the Wipe Off Cleaner;
* optional, apply 2 coats of colour and cure each layer in a lamp
- Apply PrimoUltimo over the entire surface and cure in the lamp for 30 seconds;
- Wait for the top to cool down;
- Wipe the dispersion with a dust-free cotton swab moistened with Cleaner Super Shine;
- Polish the surface with a dry dust-free cotton swab.
- Dual Forms
- Wash and disinfect yours and your customer's hands;
- Put on gloves;
- Assess the condition of the customer's hands and nails to make sure that there are no contraindications for the treatment;
- Push back the cuticles using a cuticle pusher or wooden stick;
- Treat the cuticles with e-file bits, e.g. no. 9, 1;
- Use a 180 grit file to shorten the nails as much as possible and file them round;
- Use a 180 grit file to roughen the plate surface thoroughly;
- Use a soft brush to remove any excess dust from the nail plate;
- Dehydrate the nail plate with a dust-free cotton swab soaked in purple Indigo Cleaner;
- Adjust the sizes of DualForm forms;
- Rub in a thin layer of PrimoUltimo® onto the nail plate and cure in the lamp for 30 seconds;
- Using a spatula, apply the chosen Gelastic to the bottom of the form, then use a brush moistened with Control Liquid to spread it to the length of the natural nail plate. Remember that the layer should be about 1.5 mm thick;
- Press the form against the nail plate, first at the cuticles and then towards the free edge;
- Turn the customer's hand upside down;
- Using a brush moistened with Control Liquid, spread the product from the bottom of the form, shaping the free edge;
- Turn your hand over and check the form pressure against the cuticles;
- Cure in a MultiLed lamp for 60 seconds;
- Remove the form;
- Use the Wipe Off Cleaner and a dust-free cotton swab to remove the dispersion layer (remember about the bottom of the nail);
- Use the 180-240 grit file to shape it;
- Remove excess nail dust with a soft brush;
- Wipe the surface again with Wipe Off Cleaner;
* optional, apply 2 coats of colour and cure each layer in a lamp;
- Apply PrimoUltimo over the entire surface and cure in the lamp for 30 seconds;
- Wait for the top to cool down;
- Wipe the dispersion with a dust-free cotton swab moistened with Cleaner Super Shine;
- Polish the surface with a dry dust-free cotton swab.
Gelastic Glass Pink
120 PLN
60 g
60 g